Ozone Monitor

  • Ozone Gas Monitor Controller with Alarm

    Ozone Gas Monitor Controller with Alarm

    Model: G09-O3

    Ozone and Temp.& RH monitoring
    1xanalog output and 1xrelay outputs
    Optional RS485 interface
    3-color backlight display three scales of ozone gas
    Can set the control mode and method
    Zero point calibration and replaceable ozone sensor design

     

    Real-time monitoring air ozone and optional temperature and humidity. Ozone measurements have temperature and humidity compensation algorithms.
    It provides one relay output to control a ventilator or ozone generator. One 0-10V/4-20mA linear output and a RS485 to connect a PLC or other control system. Tri-color traffic LCD display for three ozone ranges. The buzzle alarm is available.

  • Ozone Split Type Controller

    Ozone Split Type Controller

    Model: TKG-O3S Series
    Key words:
    1xON/OFF relay output
    Modbus RS485
    External sensor probe
    Buzzle alarm

     

    Short Description:
    This device is designed for real-time monitoring of air ozone concentration. It features an electrochemical ozone sensor with temperature detection and compensation, with optional humidity detection. The installation is split, with a display controller separate from the external sensor probe, which can be extended into ducts or cabins or placed elsewhere. The probe includes a built-in fan for smooth airflow and is replaceable.

     

    It has outputs for controlling an ozone generator and ventilator, with both ON/OFF relay and analog linear output options. Communication is via Modbus RS485 protocol. An optional buzzer alarm can be enabled or disabled, and there’s a sensor failure indicator light. Power supply options include 24VDC or 100-240VAC.

     

  • Ozone O3 Gas Meter

    Ozone O3 Gas Meter

    Model: TSP-O3 Series
    Key words:
    OLED display optional
    Analog outputs
    Relay dry contact outputs
    RS485 with BACnet MS/TP
    Buzzle alarm
    Real-time monitoring air ozone concentration . Alarm buzzle is available with setpoint preset. Optional OLED display with operation buttons. It provides one relay output to control an ozone generator or ventilator with two control way and setpoints selection, one analog 0-10V/4-20mA output for ozone measurement.