CO2 Sensor and Transmitter
-
Carbon Dioxide Sensor NDIR
Model: F2000TSM-CO2 Series
Cost-effective
CO2 detection
Analog output
Wall mounting
CEShort Description:
This is a low-cost CO2 transmitter designed for applications in HVAC, ventilation systems, offices, schools, and other public places. NDIR CO2 sensor inside with Self-Calibration and up to 15 years lifetime. One analog output of 0~10VDC/4~20mA and six LCD lights for six CO2 ranges within six CO2 ranges make it unique. RS485 communication interface has 15KV anti-static protection, and its Modbus RTU can connect any BAS or HVAC systems. -
NDIR CO2 Gas Sensor with 6 LED Lights
Model: F2000TSM-CO2 L Series
High cost-effectiveness, compact and consice
CO2 sensor with self-calibration and 15 years long-life
Optional 6 LED lights indicate six scales of CO2
0~10V/4~20mA output
RS485 interface with Modbus RTU ptotocol
Wall mounting
Carbon dioxide transmitter with 0~10V/4~20mA output, its six LED lights is optional for indicating six ranges of CO2. It’s designed for applications in HVAC, ventilation systems, offices, schools, and other public places. It features a Non-Dispersive Infrared (NDIR) CO2 sensor with Self-Calibration, and 15 years lifetime with high accuracy.
The transmitter has a RS485 interface with 15KV anti-static protection, and its the protocol is Modbus MS/TP. It provides an on/off relay output option for a fan control. -
CO2 Sensor in Temperature and Humidity Option
Model: G01-CO2-B10C/30C Series
Key words:High quality CO2/Temperature/Humidity transmitter
Analog linear output
RS485 with Modbus RTUReal-time monitoring ambiance carbon dioxide and temperature & relative humidity, also combined both humidity and temperature sensors seamlessly with the digital auto compensation. Tri-color traffic display for three CO2 ranges with adjustable. This feature is very suitable for installation and use in public places such as school and office. It provides one, two or three 0-10V / 4-20mA linear outputs and a Modbus RS485 interface according for different applications, which was easily integrated into building ventilation and commercial HVAC system.
-
CO2 Transmitter in Temperature and Humidity Option
Model: TS21-CO2
Key words:
CO2/Temperature/Humidity detection
Analog linear outputs
Wall mounting
Cost-effectiveA low-cost CO2+Temp or CO2+RH transmitter is designed for applications in HVAC, ventilation systems, offices, schools, and other public places. It can provide one or two 0-10V / 4-20mA linear outputs. Tri-color traffic display for three CO2 measuring ranges. Its Modbus RS485 interface can integrate devices to any BAS system.
-
Duct CO2 Transmitter with Temp.&RH
Model: TG9 Series
Key words:
CO2/Temperature/Humidity detection
Duct Mounting
Analog linear outputs
In-duct real time detect carbon dioxide, with optional temperature and relative humidity. A special sensor probe with the water-proof and porous film can be easily installed into any air duct. LCD display is available. It has one, two or three 0-10V / 4-20mA linear outputs. The end user can change CO2 range which correspond with the analog output via Modbus RS485, also can preset the inverse proportion liner outputs for some different applications. -
Basic CO2 gas sensor
Model: F12-S8100/8201
Key words:
CO2 detection
Cost-effective
Analog output
Wall mounting
Basic carbon dioxide (CO2) transmitter with NDIR CO2 sensor inside, which has Self-Calibration with a high accuracy and 15 years lifetime. It’s designed for easy wall-mounting with one linear analog output and a Modbus RS485 interface.
It is your most cost-effective CO2 transmitter. -
NDIR CO2 Sensor Transmitter with BACnet
Model: G01-CO2-N Series
Key words:CO2/Temperature/Humidity detection
RS485 with BACnet MS/TP
Analog linear output
Wall mounting
BACnet CO2 transmitter with temperatue and relative humidity detection, white backlit LCD displays clear readings. It can provide one, two or three 0-10V / 4-20mA linear outputs to control a ventilation system, BACnet MS/TP connection was integrated to BAS system. The measuring range can be up to 0-50,000ppm. -
Carbon Dioxide Transmitter with Temp.&RH
Model: TGP Series
Key words:
CO2/Temperature/Humidity detection
External sensor probe
Analog linear outputs
It is mainly used in the application of BAS in industrial buildings to real time monitoring carbon dioxide level, temperature and relative humidity. Also suitable for applications in plant areas such as mushroom houses. The lower right hole of the shell can provide expandable use. The external sensor probe to avoid internal heating of the transmitter from affecting measurements. White backlight LCD can display CO2, Temp and RH if required. It can provide one, two or three 0-10V / 4-20mA linear outputs and a Modbus RS485 interface.