Carbon Dioxide Monitors and Controllers
-
NDIR CO2 Sensor Transmitter with BACnet
Model: G01-CO2-N Series
Key words:CO2/Temperature/Humidity detection
RS485 with BACnet MS/TP
Analog linear output
Wall mounting
BACnet CO2 transmitter with temperatue and relative humidity detection, white backlit LCD displays clear readings. It can provide one, two or three 0-10V / 4-20mA linear outputs to control a ventilation system, BACnet MS/TP connection was integrated to BAS system. The measuring range can be up to 0-50,000ppm. -
Carbon Dioxide Transmitter with Temp.&RH
Model: TGP Series
Key words:
CO2/Temperature/Humidity detection
External sensor probe
Analog linear outputs
It is mainly used in the application of BAS in industrial buildings to real time monitoring carbon dioxide level, temperature and relative humidity. Also suitable for applications in plant areas such as mushroom houses. The lower right hole of the shell can provide expandable use. The external sensor probe to avoid internal heating of the transmitter from affecting measurements. White backlight LCD can display CO2, Temp and RH if required. It can provide one, two or three 0-10V / 4-20mA linear outputs and a Modbus RS485 interface. -
Indoor Air Quality Monitor for CO2 TVOC
Model: G01-CO2-B5 Series
Key words:CO2/TVOC/Temperature/Humidity detection
Wall mounting/ Desktop
On/off output optional
Indoor air quality monitor of CO2 plus TVOC(mix gases) and temperature, humidity monitoring. It has tri-color traffic display for three CO2 ranges. The buzzle alarm is available which can be turned off once the buzzer rings.
It has the optional on/off output to control a ventilator according to CO2 or TVOC measurement. It supports power supply: 24VAC/VDC or 100~240VAC, and can be easily mounted on the wall or placed on a desktop.
All parameters can be preset or adjusted if required. -
Air Quality Sensor with CO2 TVOC
Model: G01-IAQ Series
Key words:
CO2/TVOC/Temperature/Humidity detection
Wall mounting
Analog linear outputs
CO2 plus TVOC transmitter, with temperature & relative humidity, also combined both humidity and temperature sensors seamlessly with the digital auto compensation. White backlit LCD display is option. It can provide two or three 0-10V / 4-20mA linear outputs and a Modbus RS485 interface for different applications, which was easily integrated into building ventilation and commercial HVAC system. -
Duct Air Quality CO2 TVOC Transmitter
Model: TG9-CO2+VOC
Key words:
CO2/TVOC/Temperature/Humidity detection
Duct installation
Analog linear outputs
Real time detect carbon dioxide plus tvoc (mix gases) of the air duct, also optional temperature and relative humidity. A smart sensor probe with the water-proof and porous film can be easily installed into any air duct. LCD display is available if required. It provides one, two or three 0-10V / 4-20mA linear outputs. The end user can adjust CO2 range which correspond with the analog outputs via Modbus RS485, also can preset the inverse proportion liner outputs for some different applications.